Tree Cabling and Bracing Service

Tree cabling and bracing is a system that is designed to add supplemental strength to a tree. There are a few different systems we can use depending on the severity of the issue. 

The first is called bracing and that is where we permanently install a large bolt into the branch union of the tree and mechanically fasten the branch to the trunk of the tree. We drill a hole through it and then install the bolt. This will prevent the branch from falling and eventually the tree will grow around the bolt. 

The next one is called static cabling. That is where we fasten two or more branches together using steel cables. We drill into the tree and attach anchor points that we then attach steel cables to. This distributes the weight of the branches to other portions of the tree taking the stress off of a weak branch union. 

The other system we use is called dynamic cabling. That is where we attach two or more branches together with specialized weather resistant ropes. The key here is that we splice the ropes around the branches and leave the rope slightly loose.

By leaving the rope slightly loose it does not affect the tree at all unless there is extra stress on the branches from wind or snow. During high wind the branches will sway but as soon as they stretch too far the ropes will tighten and they wont be able to move far enough to break. Dynamic cabling is a great way to prevent damage to your trees and protect your property. After installation it should be inspected and readjusted every 1 to 2 years.